Fan for HVAC systems
We keep a large volume of fan coil components in our warehouse in Moscow, choose a direction and order on the website, or call us and we will select spare parts for you
The failure of a fan causes the HVAC (HVAC) system of facilities and buildings to shut down, jeopardizing the operation of the facility for its intended purpose, and in some cases, shutting down the system can lead to a very serious accident.
Fan coil fans: purpose, types, selection
Fancoil is an integral part of many climate systems, the closer of treated air to the intended room. The very translation of this word from English (fan coil) indicates its two main parts - a fan and a heat exchanger. Thus, it may be necessary to buy a fan for a fan coil unit both when operating a wide variety of HVAC complexes, and when creating new ones.
Characteristics
Due to the generally difficult-to-reach placement in crowded rooms and long-term operation, fans of this purpose are required to
- sufficient power for effective convection throughout the room;
- high efficiency, economy;
- low noise level;
- reliability, maximum service life without repairs and, if possible, even without maintenance.
Разновидности конструкции
Специфика расположения фанкойлов налагает требования к конструктиву и компоновке их узла. Часто (как при размещении промышленных устройств за подвесным потолком, так и радиальной эстетики не скрываемых внутренних блоков бытовых и офисных сплит-систем) они должны быть компактными хотя бы в одном воплощении. Этого можно добиться путем обдува теплообменника.
- numerous small fans distributed over its area;
- flat centrifugal impeller with flow redirection;
- wide axial propeller;
- impeller "squirrel wheel", elongated, but of small diameter.
It is the last solution that has become widespread - due to its compactness along two axes (not a plane, but a narrow cylinder) with a blow not end-face, but radial, sideways along the entire length, covering a fairly large area of the heat exchanger. If in the first three options, in addition to the impeller, a flat motor is also required (which is irrational for its design) or its integration into the impeller (which reduces its effective area), or its placement is not on the same axis as the impeller (which requires additional transmission and creates a radial force in the bearings), then small-diameter "squirrel wheels" are usually located on the double-sided shaft of the same narrow electric motor, practically eliminating radial loads and fitting into the minimum dimensions.
The range of Fancoil Motors includes fans for fan coil units of various manufacturers, designs and capacities - both in the form of complete systems, and in parts - electric motors, impellers, fasteners, protection and control units.
Fill out the questionnaire and our specialist will select the FAN COIL FAN that suits you